R/C Airplane and Boat Models, Wood Scouting Projects and Model Rockets.
For use on paper, fabric coverings, balsa and basswood.
Clear dope may be applied over all Aero-Gloss dope colors for added luster.
Contains no lead.
REQUIRES: Use in a well ventilated area with lung, eye and skin protection.
Aero-Gloss Thinner for airbrushing and clean-up.
(If airbrushing, thin 1 part dope with 1 part Aero-Gloss thinner.)
COMMENTS: Flammable: Contains toluol and methyl ethyl keytone.
As with any type of painting procedure, always test for compatibility
of materials on a scrap piece before attempting to paint model.
For best results: Fill and seal wood with Sanding Sealer, Balsa
Fillercoat Primer or Prep Primer. Sand smooth and clean surface.
Use at 70 to 80 degrees (F), brushing or airbrushing with several
thin coats instead of one heavy coat. To thin for airbrushing, use
only Aero-Gloss Thinner. Dries ready-to-handle in 30 minutes;
recoat in 1 hour for brushing, and any time for spraying.
Tape free in 30-60 minutes before sanding and 24 hours or overnight
before masking with vinyl electrical tape for trim painting. After
painting trim, dry at least 15 minutes before removing tape.
Cures to maximum fuel resistance in 3 days under normal drying
conditions. Dust free in 5-10 minutes.
Allow 72 hours dry time if Formula-U is to be applied as a topcoat.
Tissue Models: Final applications of 1 part dope to 1 part Aero-Gloss
thinner provides the smoothest finish.